Flexture test12/16/2023 Flexural Test Devicesįlexural test device for center-point or two-point (third-point ASTM) loading flexural tests on concrete beams of 100 x 100 x 400-500 mm or 150 x 150 x 600 - 750 mm.Ĭonsisting of two upper rollers and two lower rollers of 38 mm dia. UTC-4512 comprises an upper platen with ball seating assembly included and a lower platen both of 165 mm diameter.ĭistance pieces need to be added to an order to allow proper spacing. Outer dimensions 700x700 mm and 100x100 mm square section loading punch. With two 50 mm high accurate displacement transducer. x 610 mm long and 40 mm dia and an upper loading piston with ball seating assembly.įrame for Energy Absorption of Sprayed Concrete Specimens The set includes two lower rollers 38 mm dia. Suitable for flexural testing of concrete pavers and terrazzo tiles, natural stone kerbs and slabs.įlexural Test Assembly for Concrete Kerbs Two lower rollers and one upper roller of 38 mm dia. The test assembly is used for center or two-point loading flexural tests on 100 mm or 150 mm concrete beams.įlexural Test Assemblies for Concrete Tiles The auxiliary testing frames can be used on all UTEST flexural testing frames.įlexural Testing Assembly for Concrete Beams The Auxiliary testing frame is used for the measurement of deflection during the flexure test on 100x100x400/500 mm or 150x150x500/600 mm beams. UTC-5660 is compatible with all accessories required for flexural, transverse or compression tests. This test frame also supports concrete railway sleeper testing accessories.ĭistance Centre of Piston to Side of Frame The load frame is a four column design carrying the ram fitted to the upper crosshead. UTEST’s 600kN capacity flexural frame is manufactured for minimum deflection at maximum load, resulting in extremely high accuracy. The C type design is ideal either for a conventional flexural test or for more sophisticated tests such as deformability and ductility index, as it has a very rigid structure. UTC-5630 is a 300kN C type open structure designed to allow easy and practical front loading of specimens. It will support the full range of Flexural testing accessories. UTC-5610 is a U type frame of 100kN capacity. All frames can be used with any UTEST power pack as an independent flexural machine or can be connected to a compression machine as a second frame. A load cell is used for load measurements on all frames. The ram is returned with the use of dead weight or springs to receive maximum accuracy on the load measurement. All frames are complete with a single acting down stroking ram with over-travel switch protection to shut the machine down when maximum ram travel is reached. ![]() The load frame is made from welded steel and carries the ram fitted to the upper crosshead. Each frame is compatible with a full range of testing accessories for conventional two or single point loadings and specialized tests for tiles, kerbs and other elements. Utest’s flexural testing frames are designed with stiff construction to limit deformation under load.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |